Flexible transfer line
To ensure that the gases reach the "point of use" with low evaporation losses from the containers, we offer vacuum super insulated transfer line systems and associated equipment.
Standard equipment —
Flexible transfer line
To ensure that your project can be implemented within the shortest possible time, we are at your side from the very beginning. Together with you, we carry out the planning, construction and installation of the cryogenic piping system tailored to your plans.
A modular system specially developed for nominal diameters DN 14 and DN 25 is suitable for a wide range of tasks and is available from stock in standard lengths of 3, 6 and 12 m.
- Inner pipe made of highly corrosion-resistant, cold-resistant stainless steel (1.4301), completely welded
- Combined vacuum sealing and safety device protects the vacuum chamber from impermissibly high pressure
- Expansion compensator for the compensation of thermal length changes
- Multilayer vacuum insulation through computer-optimized thermodynamic design
Convincing advantages:
- Optically pleasing
- Made of anti-magnetic, highly corrosion-resistant stainless steel, therefore also suitable for use in clean rooms and in the food industry
- High thermal quality through computer-aided, optimized thermal design and multi-layer vacuum super insulation between inner and outer pipes.
- Can be easily extended and combined by using plug-in couplings
- Long service life of the vacuum by using adsorption material and special getters. Thereby you reduce your gas consumption and extend the maintenance intervals.
Technical data of
the flexible transfer line:
| nominal size - flexible transfer line | DN 20 | DN 32 |
| coupling type: 1 = plug-in; 2= welding | 1 - DN14 | 1 - DN25 |
| diameter outside, cable (mm) | 68 | 86 |
| diameter outside, weld coupling (mm) | - | - |
| wall breakthrough Ø (mm) | 150 | 200 |
| smallest installation radius (mm) | 400 | 500 |
| Assembly requirement plug coupling (mm) | 300 | 400 |
| Rec. operating overpressure, max. (bar) | 8 | 8 |
| design pressure (bar) | 18 | 18 |
| weight, empty (kg/m) | 3.5 | 6.6 |
| weight, full (kg/m) | 3.8 | 6.6 |
| cold driving quantity LIN (l/m) | 0.38 | 0.58 |
| heat inflow rates | ||
| Pipe without built-in components (W/m) | 1.10 | 1.30 |
| or related to LIN (l/m*h) | 0.025 | 0.029 |
| per coupling (W) | 2.8 | 4.5 |
| or related to LIN (l/h) | 0.06 | 0.10 |
Certificates
Flexible transfer line
To ensure that the gases reach the "point of use" with low evaporation losses from the containers, we offer vacuum super insulated transfer line systems and associated equipment.