Vacuum super insulated transfer lines in flexible and rigid construction.
We take over the project planning, production and installation of your cryogenic piping systems in vacuum super insulated design for the liquid gases nitrogen, oxygen, helium and argon.
Thanks to the super-insulation, even larger distances can be bridged economically. Our experienced engineers guarantee you safe and cost-saving operation of your cryogenic plants with our piping systems through the consistently applied modular principle. To ensure that cryogenic liquefied gas is always directly available at the point of use, components such as phase separators and gas phase separators are included in the scope of delivery.
Our solutions for the transfer of liquefied gases:
The transfer lines can be designed in various nominal widths with plug-in or welded couplings. Vacuum super insulated hand valves, pneumatic valves as well as pressure and level controls complete the range of the cryogenic piping system.
An overview of all Cryotherm cryotechnical products for transferring liquefied gases:
Economic technology for nature and environment
In distribution transport, the refrigeration system must immediately restore the necessary temperatures after each door opening. Our "CRYOGEN®-Trans" system provides rapid cooling and cools your truck with cryogenic liquid nitrogen. This means that the cargo area is brought back to the required temperature extremely quickly after a door opening.
Accessories:
- Installation material for single- and multi-compartment vehicles whether trailer, semi-trailer, swap bodies or container.
- Weather protection hood
- Temperature control. In multi-chamber vehicles, the number of control units and temperature sensors depends on the number of chambers.
- Distribution box
- Door switch or door switch combined with tail lift control
- Safety switch
Convincing advantages:
- Very low operating costs in long-distance operation
- up to 44,880 sequins of 0.25 millilitres each
- Large cooling capacity in distribution transport
- Optimal cooling distribution
- Redundant cooling
- Noiseless
- Life expectancy: 30 years
- Robust construction made of highly corrosion-resistant cold-resistant stainless steel or high-strength aluminium
- Multi-layer vacuum insulation and computer-optimized thermodynamic design
- inner and outer container each separately helium leak tested
- Long-term vacuum protection through high-quality adsorption and getter materials
Technical data of
the CRYOGEN® Trans:
container designation | CT 200 | CT 300 | CT 430 | CT 550 |
filling capacity (l) | 200 | 300 | 409 | 523 |
operating pressure (bar) | 5 | 5 | 5 | 5 |
weight, empty (kg) | 140 | 186 | 300 | 380 |
weight, full (kg) | 300 | 427 | 630 | 800 |
total length (H) (mm) | 1580 | 2040 | 2290 | 2720 |
Diameter E (mm) | 600 | 600 | 650 | 650 |
Distance bracket (±100 mm) B (mm) | 800 | 1000 | 1200 | 1400 |
distance bracket A (mm) | 525 | 625 | 700 | 800 |
length bracket D (mm) | 620 | 630 | 716 | 716 |
width bracket C (mm) | 80 | 80 | 100 | 100 |
Height of mounting bracket (mm) | 624 | 624 | 700 | 700 |
*other version on request.
CRYOGEN® Trans
Do you need a suitable, robust and low-maintenance transport refrigeration to secure your cold chain? With CRYOGEN® Trans, temperatures are just right even in midsummer - even when the truck load compartment is partially unloaded.